BE HEARD ANDNOTSEEN

You asked, we answered! TheStealthSpare Tire Delete kit is now available!After many hours of engineering and design, we’ve developed a bracket that not onlyfitsmorefull size trucks and SUV’s, but when installed has alower profile than any other system before.With the bells tucked away, this new sleek configuration gives you the ability to be heard and not seen.

New features include:

• Multidirectional horn mounting pattern;sound projecting from both sidescreates a 360-degree wall of sound.
• Fits more vehicles than before. New design allows formultiple mounting configurations.
• New component layoutgives5″ of extra ground clearancecompared to the previous Spare Tire Delete kit by moving the bells up into the spare tire well.

Important Notes:

• Fitsmostfull-size pickups and SUV’s.
• The spare tire delete kit is shown assembled above forillustration purposes only. The kit will arrive as individual components andassembly will be required. Please check the install instructions in the section below.
• This bracket isNOTcompatible with the S6 mounting extensions. The additional bells must be mounted individually.

INCLUDES:

• Shocker XL train horns
• Stealth Spare tire delete bracket
• 2-gallon 6 port air tank
• HornBlasters 1/2″ Black Widow electric air valve
• HornBlasters 3Q stealth black air compressor
• 110/150 PSI pressure switch w/ 40 amp relay
• Remote mountable intake filter assembly
• Spare air filter elements
• 12ft of 5/16″ D.O.T. approved air line
• 2ft of 1/2″ D.O.T. approved air line
• 6ft of 3/8″ air line (for air compressors air intake)
• 22ft of 10-gauge red wire
• 22ft of 18-gauge blue wire
• 22ft of 18-gauge grey wire
• HornBlasters 200 PSI stainless steel liquid-filled air gauge
• Brass NPT fittings kit including a safety blow-off & drain cock
• Complete wiring kit with fuse holder & fuses
• Mounting hardware
• Detailed instructions

SPECIFICATIONS / FILL RATES:

• Part Number:HK-STEALTH
• Operating Pressure:150 PSI
• Restart Pressure:110 PSI
• Voltage:12-Volt DC
• Max Amp Draw:20-22 Amps
• Horn:Shocker 4 train horn kit
• Horn Material:High-impact fiberglass reinforced ABS
• Horn Measurements

• 1 19.50 (495.30 mm)	2 16.25 (412.75 mm)
  3 14.75 (374.65 mm)	4 12.75 (323.85 mm)

• Air Tank:HornAir 2-gallon 6 port air tank
• Average Fill Time:60-70 seconds
• Air Flow:1.41 CFM
• Assembled Length:27″ (685.8 mm)
• Assembled Width:21″ (533.4 mm)
• AssembledHeight:8″ (203.2 mm)
• Assembled Weight:40lbs

* Supply Voltage: 13.8 Volts