BDS Suspension 8″ Long Arm Kit for the 2009-2013 Dodge 2500 3/4 Ton & 2009-2012 3500 1 Ton 4WD Pickup including Mega Cab.

This suspension system features 8″ progressivePro-Ride Coil Springsfor Diesel models and solid steel upper long arms and thick tubular lower long control arms. The long control arm reduce caster change through wheel travel creating a more controlled feeling in the steering wheel both on and off road. All four control arms are greasable for long term performance.

This 4-Link long arm lift kit retains the factory triangulation of the arms as well which adds to the stability of the suspension system. A dropped forged pitman arm is included to maintain the factory steering angles. A track bar relocation bracket is included to properly center the axle under the vehicle. Extended bump stops and sway bar links are included to maintain the OE characteristics. The system includes a transfer case indexing ring and driveshaft spacer for use with stock front and rear driveshafts.

The rear of the Dodge Ram is lifted via 5″ block kit.

A few of the many optional accessories offered with this 8″ lift kit are a steering stabilizer, brake lines, traction bars, and shock options.

Check out theinstall articledone by Four Wheeler Magazine.

• Tire & Wheel Combinations
• 38″ x 14.0″ w/17 x 9 and 4.5″ back spacing

*Trimming may be required*

• Est. Installation:8 hours
• Difficulty Level (easy 1 – 5 complicated):3
• View completeVehicle Fitment Informationhere

Important Kit Notes

• 1. Measure rear axle tube before ordering. Some 4″ axle models with dual overloads will require 4068.
• 2. Rear lift options will not fit dually applications.
• 3. If driveline vibration occurs, order either transfer case drop or indexing kit available in optional accessories. NOTE: 122606 transfer case drop kit will only replace the OE bracket #52121938AA
• 4. 102009 Rear brake lines will not fit 2012-2013 models.
• 5. Additional front driveline modification may be required.
• 6. Exhaust modification will be required for dual rear shock kit 122009.
• 7. 2500 Gas models will require modification to the front exhaust crossover pipe on driver side for proper clearance when a transfer case indexing ring kit is installed
• 8. Will not fit Cab and Chassis models